TRUSTED QUALITY. UNDENIABLE PERFORMANCE. INDUSTRY HERITAGE.

E6022

AWS A5.1 E6022
ASME SFA 5.1 E6022

E6022 are recommended for single-pass, high-speed, high current welding of groove welds in the flat welding position, lap joints in the horizontal welding position, and fillet welds on sheet metal. The weld face tends to be more convex and less uniform, especially since the welding speeds are higher. It is designed for welding roof decking to support beans and applications where burn-through spot welds are required. May also be used on poor or hard to clean steels such as painted, greasy and galvanized/ plated steels and square edge butt joints

Applications:

E6022 is designed for welding roof decking to support beans and applications where burn-through spot welds are required. May also be used on poor or hard to clean steels such as painted, greasy and galvanized/ plated steels and square edge butt joints

TYPICAL WELD METAL CHEMISTRY (%)

C

0.13

Mn

1.14

Si

0.34

P

0.027

S

0.012

TYPICAL MECHANICAL PROPERTIES OF WELD DEPOSIT
(As welded)

Yield strength (psi)

56-64,000

Tensile strength (psi)

69-79,000

Elongation in 2" (%)

24-26

AVAILABLE SIZES AND RECOMMENDED CURRENT (DC+)

Diameter (in.)

3/32

1/8

5/32

3/16

7/32

1/4

Length (in.)

14

14

14

14

14

14

Amps F


110-150

150-190




Amps



V & O


23-27

24-30